43 lines
1.4 KiB
INI
43 lines
1.4 KiB
INI
# Contents of /etc/systemd/system/wipri.service
|
|
# This is an example file used for adding 2nd service for wipri for ethernet
|
|
#
|
|
# Instructions to use this file:
|
|
#
|
|
# 1.) Install wipri either as command or boot (for wifi for example)
|
|
# 2.) Edit this file to change flag (-i is all brands) and eth0 to your ethernet device (eth0 most common)
|
|
# 3.) Copy this wipri-eth0.service file using command below:
|
|
# sudo cp wipri-eth0.service /etc/systemd/system/wipri-eth0.service
|
|
# 4.) Run the following commands to load and enable eth0 randomization at boot:
|
|
# sudo systemctl daemon-reload
|
|
# sudo systemctl enable wipri-eth0.service
|
|
# 5.) Now next time you boot, your eth0 device should be using wipri!
|
|
#
|
|
# STOP WIPRI ETHERNET SERVICE: sudo systemctl stop wipri-eth0
|
|
# DISABLE WIPRI ETHERNET SERVICE: sudo systemctl disable wipri-eth0
|
|
#
|
|
# DISABLING wipri-eth0 will prevent it from starting next boot.
|
|
# If you have problems, follow above command to STOP wipri-eth0 to end process
|
|
#
|
|
# Have fun!
|
|
# righttoprivacy[at]tutanota.com
|
|
# Tutorials / Support: https://buymeacoffee.com/politictech
|
|
#
|
|
|
|
[Unit]
|
|
Description=WiPri eth0 Privacy Enhancement
|
|
# Change mac
|
|
Before=boot.mount
|
|
DefaultDependencies=no
|
|
|
|
# Feel free to change wipri commands below to meet your needs/wants
|
|
[Service]
|
|
Type=simple
|
|
ExecStart=wipri -d eth0 -p
|
|
ExecReload=killall -9 wipri;wipri -d eth0 -p
|
|
ExecStop=killall -9 wipri
|
|
Restart=on-failure
|
|
RemainAfterExit=no
|
|
|
|
[Install]
|
|
WantedBy=basic.target
|